5 Document Printing
This chapter provides instructions for using the Document Printer and the Enhanced Printer. The following information and procedures can be found in this guide:
•Printer specifications.
•Changing print positions.
•Replacing the ink cartridge and ink blotter strips.
NOTE: Information about enabling printing and setting up print strings can be found in Chapter 4, Image Processing.
The Document Printer/Enhanced Printer operates at full scanner speed. The printer can add a date, time, document sequential counter, and custom messages.
The print string can be configured to include both literal (static) information (i.e., information that stays the same for each document, such as batch name or operator) and dynamic information (i.e., information that may change for each page scanned, such as the document sequential counter). The capture software application controls static fields; any information that the software allows you to enter can be sent to the printer.
All printer controls and functions are accessible through the ISIS Driver or TWAIN Datasource. Printing must be enabled or disabled for each scan session, which is usually done by using a Setting Shortcut (TWAIN GUI).
NOTES:
•Clean the scanner’s paper path components daily when using the printer.
•You cannot print on documents that are smaller than 10 cm (4 in.).
•The ink cartridge must be installed before turning on the scanner, or it could result in errors when printing is attempted.
115 |
