■Connecting the input device and adjusting the level
5As explained in “■ Connecting the input device and adjusting the level” (p.11, p.12), connect the input device and adjust the level. At this time, make adjustments so that there is no difference between the volume of the instrument that is being input and the volume of the track.
■Select the input monitor
6Press the [SYSTEM] key several times (indicator lit) to access the “Mon” display (refer to SYSTEM P3). Then rotate the [VALUE] dial to select Auto.
Mon:Auto
SYSTEM
E
■Auto Play function and Auto Repeat function
When performing Auto Punch In/Out, it is conve- nient to use the Auto Play function or the Auto Repeat function in conjunction with Auto Punch In/Out (refer to p.51, p.52).
When the Auto Play function is on, pressing the [REC] key and then pressing the [PLAY] key will automatically move to the
7Pressing the [PLAY MODE] key once
will make the display show “ ”, and | PLAY | |
MODE | ||
the Auto Play function will be turned | ||
E |
on. Pressing the [PLAY MODE] key once again will make the display show
“
”, and the Auto Repeat function will be on.
8Press the [EDIT] key, then press the [PLAY MODE] key several times to make the display read “Pre- Rol”, and specify the
[VALUE] dial to specify the value. Press the [
] key and rotate the [VALUE] dial to set the unit to either measures (M) or seconds (s).
PstRol:02M
EDITPLAY
MODE
E
9Press the [PLAY MODE] key to make the display read “PstRol”, and referring to step 8, set the
*Subsequent steps
■Rehearsing auto punch in/out
Before you actually perform auto punch in/out recording, it is a good idea to rehearse the record- ing. If you do not need to rehearse, proceed to “■ Auto punch in/out setting”.
10 Press the [REC MODE] key several times to select AUTO PUNCH + REHEARSAL (both indicators lit).
When AUTO PUNCH + REHEARSAL is selected, initiating
recording will cause the input monitor etc. to func- tion in the same way as if recording were actually being performed. This allows you to rehearse the recording.
11Press the [REC] key ([REC] and [PLAY] indicator will blink), and then press the [PLAY] key ([REC] and [PLAY] indicator lit) to begin playback. The [TRACK STATUS] indicator that was set to REC will blink, and the track playback sound will be heard.
For tracks whose [TRACK STATUS] is REC, the EQ and fader will affect only the input sound, and will not affect the playback sound. After adjusting the input level, do not modify the fader or EQ settings during playback, since this will change the volume and EQ of the input sound.
12When the IN time location is reached, the [TRACK STATUS] indicator will change from blinking to lit, the [REC] indicator will begin blinking, and the external input sound will be heard. Begin rehears- ing your performance.
13When the OUT time location is reached, the [TRACK STATUS] indicator will blink, the [REC] indicator will go dark, and the track playback sound will again be heard. Stop rehearsing your performance.
■Auto punch in/out setting
14 Press the [REC MODE] key several | REHEARSAL |
times to select AUTO PUNCH | AUTO PUNCH |
(indicator lit). | REC |
| MODE |
■Starting and stopping recording
15Press the [REC] key ([REC] and [PLAY] indicator will blink), and then press the [PLAY] key ([REC] and [PLAY] indicator lit) to begin playback.
The [TRACK STATUS] indicator that was set to REC will blink, and the track playback sound will be heard.
16When the IN time location is reached, the [TRACK STATUS] indicator will change from blinking to lit, and recording will begin. At this time the external input sound will be heard. Play to record your per- formance.
17When the OUT time location is reached, the [TRACK STATUS] indicator will change back to blinking, the [REC] indicator will go off, and recording will end. The track playback sound will once again be heard.
■Listening to the recorded performance (Play- back)
18Move the current time location to a point earlier than where you began
Also, playing back with [TRACK STATUS] set to REC will allow you to hear the sound just as it was
18
