26. PAIR On/Off

P1-1 Pairing on/off

[On, Off]

Turns pairing on/off for the mixer channels.

Mixer settings of adjacent odd and even numbered channels (1-2, 3-4 and 5-6) can be linked so that changes to the setting of one channel will be simulta- neously reflected by the setting of other channel.

The following mixer settings can be pairing.

[TRACK STATUS] key, High EQ “HEQ”, Low EQ “LEQ”, Effect Send “Snd”, Aux send “Aux”, Balance ([PAN] knobs), and the channel volume level ([CHAN- NEL] faders).

For each of these parameters except for [TRACK STA- TUS] and [CHANNEL] fader, you can specify whether or not the parameter will be paired. (Refer to EDIT SYSTEM P3 “Channel pair enable setting”.)

Pairing can be switched on/off by simultaneously pressing the [EFFECT SEND] keys of the channels that you wish to pair.

“HEQ”, “LEQ”, “Snd” and “Aux” can be set from either the odd or even numbered channel.

In the case of the [CHANNEL] faders and [BALANCE (PAN)] knobs*, only the odd numbered channel of the pair can be set.

When pairing is On, the selected channel number for a setting such as EQ that is included in the pair will be displayed as “-” (e.g., HEQ1-2).

When pairing is Off, the selected channel number for settings such as EQ will be displayed normally (e.g., HEQ1).

*PAN will adjust the pan to the master bus if Pairing is Off, or the left/right balance to the master bus if Pairing is On.

1

Snd1-2:000

27. REC SELECT

Input/recording source select..............................................

[INPUT 1/2, INPUT 1/2+MASTER, MASTER, DIGITAL IN]

Selects the source for input and recording.

INPUT 1/2 (indicator lit): Select this when you wish to connect an external device such as a guitar, keyboard or mic to the INPUT 1/2 jacks for normal input or recording.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

INPUT 1/2+MASTER (both indicators lit): Select this when you wish to record the input from the bus master (bounce), or to record the input from an external device connected to the INPUT 1/2 jacks together with the other tracks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

MASTER (indicator lit): Select this when you wish to record the input from the master bus, or when you wish to bounce all the playback sound of all eight tracks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

DIGITAL IN (indicator lit): Select this when you wish to record from an external device such as a CD, MD or DAT that is connected to the DIGITAL IN connector.

In this case it will not be possible to use the internal effect or an external input from the AUX IN jacks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

60

Page 59
Image 59
Korg D8 manual Pair On/Off, REC Select, Snd1-2000, Input/recording source select, P1-1 Pairing on/off