5.Program playback of songs
You can enable two or more songs to playback in a specified order. This can be used to playback a medley of songs, or when you wish to record con- secutive mixdowns of songs to DAT or MD. Pro- gram Play can be performed even across multiple drives. As an example, we will explain how to playback songs in the order of song number I (internal drive) 01→ I02→ A (SCSI ID 0) 05.
1Press the [EDIT] key, and then press the [PLAY MODE] key several times to access the “P✽✽” dis- play (✽✽is the sequence of playback).
P01:I01 Ï 
EDITPLAY
MODE
E
2Rotate the [VALUE] dial to select the first step in the playback sequence; P01.
3Press the [
] key, and then rotate the [VALUE] dial to select the drive from which the song will be played back. In this example, select the internal drive I.
4Press the [
] key, and then rotate the [VALUE] dial to select the song which will be played back as the first song. In this example, select 01.
5Press and hold the [
] key for approximately 1 second to finalize the first song for playback. When this is finalized, the “?” will disappear.
6Rotate the [VALUE] dial to select the second song for playback. Referring to steps
7Press the [PLAY] key, and the songs will playback in the specified sequence, starting with I01.
Program playback is available only when you are in this page. Also, the specified sequence of songs will be canceled when you leave this page.
6.Switching scenes dur- ing playback
A set of mixer settings that have been stored is called a “scene”, and scenes can be switched as time elapses during playback. (Refer to p.29)
Moving and storing STEP5 time locations
This section explains how to move between time locations in a song. It also explains how you can store a specific time location for
instant recall.
1. Moving the current time
■Using the location counter to move
1Simultaneously press the [
] and [
] keys to move the cursor below the location counter.
01:KORG1 Ï 
NO YES
2Use the [
] or [
] keys to move the cursor to the unit of time that you wish to change (measureM, beatB, 1/96th beat, Mark etc.)*. For details on Marks, refer to p.26.
3Rotate the dial to move the time location.
Rotating the dial toward the right will increase the time, and rotating it toward the left will decrease the time.
*You can change the units of time that appear in the display. Four methods of display can be selected. (Refer to “5. DISPLAY MODE”, p.51)
■Using the [STOP], [REW] and [FF] keys to move
Moving backward
✧Press the [REW] key to move toward the beginning of the song. If you hold down the key, you will move continuously. You can also move during playback.
Moving forward
✧Press the [FF] key to move toward the end of the song. If you hold down the key, you will move con- tinuously. You can also move during playback.
Moving to the beginning of the song/Moving to the beginning of the previous song
✧If the current time is in the middle of the song, you can hold down the [STOP] key and press the [REW] key to move to the beginning of the song.
If the current time is at the beginning of the song, you can hold down the [STOP] key and press the [REW] key to select the song of the previous num- ber, and move to its beginning.
Moving to the beginning of the next song/Creating a new song
✧If you hold down the [STOP] key and press the
[FF]key, you will select the song of the following number, and move to its beginning. If the follow- ing number does not contain a song, a new song will be created for that number. (Refer to p.10)
24
