[1, 2, 3, 4, 5, 6,
This shows the currently selected channel number.
[000...100, Wet] |
Adjusts the send level to the internal effect (refer to EFFECT).
When [EFFECT ASSIGN] is INPUT 1/2
The send bus for all channels will automatically be turned off, and the audio signal from the INPUT 1/2 jacks will be sent to the effect.
When [EFFECT ASSIGN] is MASTER (Send Type)
Wet: All of the audio from the selected channel will be sent to the effect, and the Dry sound will not be sent to the master bus.
When [EFFECT ASSIGN] is MASTER (Global Type)
The send bus of each channel will automatically be turned off, and the sound of the master bus will be sent to the effect.
This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).
P2 External output (Aux) level setting
Adjusts the level that is sent to AUX OUT (external output) from after the channel faders (post fader). Adjust this setting when you are using an external effect device.
When [REC SELECT] is set to DIGITAL IN, and [EFFECT ASSIGN] is set either to INPUT 1/2 or MAS- TER (Global Type), it is not possible to use AUX IN (external input).
1 2
Aux1 :000
[1, 2, 3, 4, 5, 6,
This shows the currently selected channel number.
Off]
Adjusts the send level to AUX OUT.
This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).
24. PAN/BALANCE
Here you can adjust the pan/balance of the stereo sig- nal sent from each channel to the master bus.
In the case of channels
In the case of channels
This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).
25. FADER
Adjusts the volume level.
The recording level is adjusted by the channel faders when recording an external input (when [REC SELECT] is INPUT 1/2 or DIGITAL IN). When record- ing the master bus during track bouncing etc. ([REC SELECT] is MASTER), the recording level is adjusted by the master fader.
[CHANNEL] (1...7/8) faders (playback/input recording level adjustment)
Adjusts the volume of each track.
For channels whose [TRACK STATUS] is PLAY, adjust the playback level.
For channels whose [TRACK STATUS] is REC, adjust the input level or recording level of the signals from the INPUT 1/2 jacks or the DIGITAL IN jack.
[MASTER] fader
(master/master recording level adjustment)
Adjusts the volume level of the master bus.
This will determine the output volume of the OUTPUT L/R jacks and the DIGITAL OUT jack.
When [REC SELECT] is INPUT 1/2 or DIGITAL IN, this adjusts the volume level of the master bus.
When [REC SELECT] is MASTER, this adjusts the recording level for tracks whose [TRACK STATUS] is set to REC (ANALOG).
Chapter 3 | Reference |
|
|
|
|
59
