^Song restore

This will be displayed if you select Restore in P4-1.

This operation restores (recalls) the song that was backed up.

You can select either a removable disk (or disks) or a DAT (multiple volumes are not supported).

If a backup of all songs was performed to a removable disk, you can choose whether to restore all songs or only a specified song.

If a backup of all songs was performed to DAT, it is only possible to restore all songs.

Be aware that when you perform a Restore of all songs, the data will be written to the restore destination drive, and all data that was previously in the restore destina- tion drive will be lost.

 

 

 

 

 

12

 

13

14

 

 

 

 

 

 

 

 

Restore œ

 

A:RM 100 ø

 

15

 

16

 

 

17

18

 

19

 

A01:SngN ø

 

øB02:NoDA

P5-12 Source drive/DAT select

[A...G, H]

Selects the restore source: a removable disk drive or DAT.

Since Restore can be done only from a RM (removable disk) or DAT, this operation cannot be executed when a hard disk is selected.

A: SCSI ID 0, B: SCSI ID 1, C: SCSI ID 2, D: SCSI ID 3,

E: SCSI ID 4, F: SCSI ID 5, G: SCSI ID 6, H: DAT

P5-13

Source drive/DAT type display

(RM, DAT)

P5-14

Source drive capacity display

 

(disk capacity/no display)

 

When P5-13 is RM this will indicate the formatted capacity (bytes). For DAT, nothing will be displayed.

P5-15Source song number select

[01...50, All]

Selects the song(s) which will be restored from the source drive or DAT.

When 01...50 is selected, the selected song will be restored.

When All is selected, all songs will be restored.

If only one song was backed up, only 01 can be selected.

When restoring an “all song” backup from DAT, All is the only valid selection. If you select an individual song number, your selection will be ignored.

P5-16

Source song name display (four characters displayed)

P5-17

Destination drive select

[I...G]

Selects the restore destination drive.

I: Internal IDE (internal drive), A: SCSI ID 0, B: SCSI ID

1, C: SCSI ID 2, D: SCSI ID 3, E: SCSI ID 4, F: SCSI ID 5,

G: SCSI ID 6

P5-18Destination song number select

[01...50]

When restoring an individual song (i.e., if 01...50 was selected in P5-15), you can select the song number into which the data will be restored.

The data will be restored into the number that you specify, and songs following this restore destination number will be renumbered upward.

P5-19Destination song name display ........................

(four characters displayed)

This will be displayed only when restoring an individ- ual song (i.e., if 01...50 was selected in P5-15).

2021

øB:HD1300œ

P5-20Destination drive type display

(HD, RM)

The formatted capacity (bytes) of the disk will be dis- played only when performing an “all song restore” (All is selected in P5-19).

HD: Hard Disk, RM: Removable Disk

P5-21Destination drive capacity display .. (disk capacity)

^Initialize/format

22 23

Initial œ

A:RM 100 œ

This will be displayed if you select Initial or Format in P5-1.

Perform this operation for a newly-purchased drive. You must perform this operation on a drive which was previously used by another device before that drive can be used with the D8, or on a drive which fre- quently produces Disk Error indications during play- back, etc.

P5-22 Destination drive select

[I, A...G]

Selects the drive that you wish to initialize or format. I: Internal IDE (internal drive), A: SCSI ID 0, B: SCSI ID 1, C: SCSI ID 2, D: SCSI ID 3, E: SCSI ID 4, F: SCSI ID 5, G: SCSI ID 6

P5-23Destination drive type display

(HD, RM)

This indicates the type of drive.

HD: Hard Disk, RM: Removable Disk

50

Page 49
Image 49
Korg D8 manual Song restore, Restore œ ARM 100 ø A01SngN ø ØB02NoDA, ØBHD1300œ, Initialize/format, Initial œ