14. EDIT METRONOME

P1 Metronome volume setting

If the metronome is on (refer to METRONOME), the metronome will sound when you enter this page. You can adjust the volume while listening to the metro- nome.

1

MetVol:050

P1-1 Metronome volume setting

[001...100]

Adjusts the volume of the metronome.

The value can be changed either from this page or from EDIT TEMPO P2. To turn the metronome on/off while you are in this page, press the [EDIT] key and then press the [METRONOME] key to switch it on/off.

P2 Metronome mode setting

1

MetMod:P+R

P2-1 Metronome mode setting

[P+R, Rec, Off]

Specifies when the metronome will be sounded when it is turned on (refer to METRONOME).

P+R (Play+Recording): The metronome will sound during playback and during recording.

Rec (Recording): The metronome will sound during recording.

Off: The metronome will not sound during either playback or recording, regardless of the Metronome On/Off setting.

15.IN/LOC1, OUT/LOC2, TO/LOC3

You can store any desired location in the song to the [IN/LOC1], [OUT/LOC2] and [TO/LOC3] keys, allowing you to move to the specified location (“locate point”) by pressing the appropriate key.

The times that have been stored can also be used for Auto Play/Auto Repeat Playback, as the in/out points for Auto Punch Recording, and as edit points for track editing.

To store the current time to a key, press [STORE] and then press the desired [LOC (/IN,OUT,TO)] key.

IN/LOC1 ..................................................................

The time location stored to the [IN/LOC1] key will act as follows when the corresponding function is selected.

Move to locate point 1

Punch-in time for Auto Punch Recording

Playback begin time for Auto Play/Auto Repeat Play- back

When performing track editing,

starting time for the copy source in Copy Track starting time for the inserted blank in Blank Insert Track

starting time for the erased area in Erase Track starting time for the deleted area in Delete Track starting time for the swap source/destination in Swap Track

OUT/LOC2 ...............................................................

The time location stored to the [OUT/LOC2] key will act as follows when the corresponding function is selected.

Move to locate point 2

Punch-out time for Auto Punch Recording

Playback end time for Auto Play/Auto Repeat Play- back

When performing track editing,

ending time for the copy source in Copy Track

ending time for the inserted blank in Blank Insert Track

ending time for the erased area in Erase Track ending time for the deleted area in Delete Track ending time for the swap source/destination in Swap Track

TO/LOC3..................................................................

The time location stored to the [TO/LOC3] key will act as follows for when the corresponding function is selected.

Move to locate point 3

When performing track editing,

location to which data will be copied by Copy Track

Chapter 3

Reference

 

 

 

 

55

Page 54
Image 54
Korg D8 Edit Metronome, 15. IN/LOC1, OUT/LOC2, TO/LOC3, P1 Metronome volume setting, MetVol050, P2 Metronome mode setting