Korg D8 manual Sending the input sound to the effect, Master Send Type

When you execute the Save operation, the effect program that previously occupied that memory will be overwritten and lost.

■Starting and stopping recording

15Press the [REC] key, and then press the [PLAY] key to begin recording. Press the [STOP] key to stop recording. (Refer to ■ “Starting and stopping recording”, p.11)

■Listening to the recorded performance (Play- back)

16Move the current time to a location earlier than the point at which you began recording. Then set the [TRACK STATUS] of the recorded track to PLAY, and press the [PLAY] key to begin playback. Press the [STOP] key to stop playback. (Refer to “■ Listening to the recorded performance (Playback)”, p.11)

5.Applying an effect to the input sound and record- ing only the input sound

Here’s how you can apply the D8’s internal effect to the sound of an instrument or other sound source connected to the INPUT 1 jack or INPUT 2 jack. In this section, only the input sound is recorded. Use this method when you wish to try a variety of effects during playback and decide on the final sound later.

■Connecting the input device and adjusting the level

1Refer to “■ Connecting the input device and adjusting the level” (p.11, p.12), to connect the input device and adjust the level.

It is not possible to use the effect when recording digitally.

■Selecting the location at which the effect will be inserted

2 Press the [EFFECT ASSIGN]		key	INPUT 1/2
several	times to select MASTER
			MASTER
(Send Type) (indicator lit). With the			EFFECT
setting	MASTER (Send Type),	the
			ASSIGN
send bus will be output to the inter-			E
nal effect, which will be output to
the master bus.
	FADER		OUTPUT
INPUT	[EQ]	Effect
	Snd
		RecTrack
	HEQ LEQ

3Adjust the following effect settings while listening to the input sound of the instrument or other source.

■ Sending the input sound to the effect

4 Press the [EFFECT SEND] key several times for the input channel where you wish to apply the effect,

14