Korg D8 manual Mark points, Storing a Mark point, MarkùM001, Moving to a Mark point

4. Mark points

You can store a desired time location and move instantly to that time. Up to one hundred Mark points can be stored in each song.

■Storing a Mark point

Here’s how to use the Mark function to store the current time. A time location that has been stored in this way is called a “Mark point”.

1Move the current time to the desired location.

2Press the [STORE] key twice to prepare for storing. The display will indicate “Mark”.

Mark¿

STORE

3Press any one of the [IN/LOC 1], [OUT/LOC 2] or

[TO/LOC 3] keys. The display will indicate “Mark→ M✽✽✽(stored number)”, and the current time will be stored as a Mark point. Release the key, and the previous page will reappear.

MarkùM001	IN /	OUT /	TO /
	LOC 1	LOC 2	LOC 3

Storing during playback or recording

During playback or recording, you can perform the above steps 2 and following to store a Mark point. The time location at the instant you press the [IN/ LOC 1], [OUT/LOC 2] or [TO/LOC 3] key will be stored.

Storing using a foot switch

1Press the [SYSTEM] key several times to access the “Fsw” display, and then rotate the [VALUE] dial to select Mark.

2A Mark point will be stored at the instant you press the foot switch. You can store Mark points during playback or during recording.

■Moving to a Mark point

1Simultaneously press the [ ] and [ ] keys to move the cursor below the location counter.

2Press the [ ] key several times so that the cursor is displayed below the entire location counter.

01:SngNam

3Rotate the [VALUE] dial to select the Mark points that have been stored, and move the current time.

■Deleting a Mark point

1Press the [EDIT] key, and then press the [SYSTEM] key several times to access the “Mark” display.

Mark ú

EDITSYSTEM

E

2Press the [ ] key to access the “Del” display, and rotate the [VALUE] dial to select the Mark that you wish to delete. If you select All, all Mark points will be deleted.

Del¿M004 ?

3Press and hold the [ ] key for approximately one second to execute the operation. When the Mark has been deleted, the display will indicate “Com-

pleted”. Press the [ ] key to restore the previous display.

26