Copying

Duplex

The optional Duplex unit is required to use this function.

This function can be used in two ways:

2

❖ 1 Sided → 2 Sided

This mode makes two-sided copies from one-sided originals.

❖2 Sided → 2 Sided

This mode makes two-sided copies from two-sided originals.

Limitation

❒You cannot use the following copy paper with this function:

•Paper smaller than A5K, 51/2" ⋅ 81/2"K (possible on A5L, 51/2" ⋅ 81/2"L)

•Paper thicker than 90g/m2, 24 lb.

•Paper thinner than 64g/m2, 20 lb.

•Translucent paper

•Label paper (adhesive labels)

•OHP transparencies

•Postcards

❒You cannot use the bypass tray with this function.

❒The function might not work for

certain types of large size originals (such as A3, 11" ⋅ 17"). In this case, an optional 32MB memory or HDD is required.

1 Sided → 2 Sided

1

2

1

2

Note

❒If you set an odd number of 1-sid- ed originals in the document feed- er, the reverse side of the last page is left blank.

❒When original images are copied, the images are shifted by the width of the binding margin. You can ad- just the binding margin or binding

position. You can also change their default values. ⇒ "Front Margin: L e f t / R i g h t " , " B a c k M a r g i n : L e f t / R i g h t " , " F r o n t M a r g i n :

Top/Bottom " and "Back Margin: Top/Bottom" on p.194 “Edit 1/2”

❒By default, a binding margin is

made on the back side. You can change the value of this setting. ⇒ "1 sided → 2 sided Auto Margin: T to T" on p.194 “Edit 1/2”

88