5. REMARKS

Do's And Don'ts

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

Important

❒If you want to unplug the power cord or turn off the main power switch, make sure that the remain- ing memory space indicates 100% on the display for facsimile mode.

❒While the machine is unplugged, you can neither send nor receive a fax.

Reference

For details, see the Facsimile Refer- ence.

•When you use this machine for a long time in a confined space with- out good ventilation, you may no- tice an odd smell. To keep the workplace comfortable, we recom- mend that you keep it well venti- lated.

•Do not touch areas on or around the fusing unit. These areas get hot.

•After making copies continuously, t h e e x p o s u r e g l a s s m a y f e e l warm—this is not a malfunction.

•The area around the ventilation hole might feel warm. This is caused by exhaust air and is not a malfunction.

•Do not turn off the operation switch while copying or printing. Make sure that all copying or printing has finished.

•The machine might fail to produce good copy images if condensation forms inside the machine due to rapid temperature change.

•Do not open the covers of the ma- chine while copying or printing. If you do, misfeeds might occur.

•Do not move the machine while copying or printing.

•If you operate the machine im- properly or a failure occurs with the machine, your machine set- tings might be lost. Be sure to make a note of your machine settings.

•The supplier shall not be liable for any loss or damage resulting from a failure with the machine, loss of machine settings, or use of the ma- chine.

207