Copying

GPress the {Start}key.

Note

❒The previous copy job settings will be restored and the ma- chine will continue copying from where it left off.

2

To interrupt copying after all originals have been fed by the document feeder

APress the {Interrupt}key.

The Interrupt indicator goes on.

Note

❒Copying will not stop yet.

BPlace your original.

CPress the {Start}key.

The machine stops the original job and starts copying your original.

DWhen copying is complete, remove your originals and copies.

EPress the {Interrupt}key again.

The Interrupt indicator goes off.

The previous copy job settings will be restored and the machine will continue copying from where it left off.

Original Beeper

The beeper sounds and an error message is displayed when you leave your originals on the exposure glass after copying.

Note

❒To cancel this function, ⇒ "Tone: Original remains" on p.187 “Gen- eral Features 2/4”.

Sample Copy

Use this function to check a copy set before making a long copy run.

Limitation

❒This function can be used only when the Sort function has been turned on.

ASelect Sort and any other func- tions, and then enter the number of copy sets to be made.

BPlace the originals.

CPress the {Sample Copy}key.

One copy set is delivered as a sam- ple.

DAfter checking the results, press the [Print] key if the sample is ac- ceptable.

The number of copies made is the number you specified minus one for the proof copy.

Note

❒If you press the [Suspend] key after checking the results, re-

turn to step A to adjust the copy settings as necessary. You can change the settings for Staple, Duplex, C opy Orientation , Stamp, Margin Adjust, and Cover/Slip Sheet. However, de- pending on the combination of functions, you may not be able to change some settings.

❒You cannot use the Sample Copy function after changing the settings.

72