Copying
EPress the [User Stamp] key.
2
FPress the [Program/Delete Stamp]
key.
To program the User Stamp
APress the [Program] key.
BPress the stamp number (1 – 4) you want to program.
Note
❒Stamp numbers with m al- ready have settings in them.
❒If the stamp number is al- ready being used, the ma- chine will ask you if you wish to overwrite it — Press the [Yes] or [No] key.
CEnter the user stamp name with the letter keys on the display panel.
Note
❒You can register up to 10 characters.
Reference
For details on entering char- acters, refer to "Entering Text Characters" in the System Settings manual.
DPress the [OK] key.
EEnter the horizontal size of the stamp with the number keys, and then press the [#] key.
Note
❒You can enter sizes within the h o r i z o nt al r an g e of 1 0 – 432mm, 1.0" – 17.0", and the vertical range of 10 – 297mm, 1.0" – 11.7". However, if the area exceeds the maximum value (5,000mm2, 7.75 inch2), it is corrected to within the ac- ceptable range automatically.
❒To change the value entered, press the [Clear] or {Clear/Stop} key and enter the new value.
132