Troubleshooting

B Loading Paper

Loading Paper in Tray 1-4

Note

❒You can change the paper size. ⇒ p.170 “Changing the Paper Size”

3

Reference

Regarding paper types and sizes,

⇒p.22 “Copy Paper”.

APull out the paper tray until it stops.

BSquare the paper and load it in the tray with the copying face up.

Important

❒If you add paper to a paper tray where paper is still left, a mis- feed might occur.

❒Do not stack paper over the lim- it mark.

❒When setting small quantities of copy paper, be careful not to squeeze in the side fence too much or paper will not be fed properly.

Setting special paper in the Paper Tray 2

ASet the special paper below the limit mark of the tray.

Note

❒Shuffle the paper before loading it in the tray.

❒When copying onto paper such as translucent paper, straighten curled or warped paper before placing it in the tray.

CPush the paper tray in until it stops.

160