Troubleshooting

x Clearing Misfeeds

RCAUTION:

The fusing section of this equipment might be very hot. You should be very careful that you don't touch this section when removing the misfed paper.

Important

When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings are cleared.

3

To prevent misfeeds, do not leave any torn scraps of paper within the ma-

 

chine.

If paper misfeeds occur repeatedly, contact your service representative.

Note

More than one misfed area may be indicated. In this case, check every appli- cable area. See the following charts: A, B, C, D, P, R, Y, Z

You can find a sticker explaining how to remove misfed paper inside the front cover or inside the finisher.

164