If You Cannot Make Copies As You Want

If You Cannot Make Copies As You Want

General

Problem

Cause

Action

 

 

 

Copies are not stapled.

There are jammed staples

Remove jammed staples. ⇒ p.175

 

in the stapler.

“eRemoving Jammed Staples”

 

 

 

 

Note

 

 

 

 

 

 

After removing jammed staples,

 

3

 

 

 

 

staples might not be ejected the

 

 

 

 

 

 

first few times you try to use the

 

 

 

 

 

 

stapler.

 

 

 

 

 

 

 

 

 

 

 

 

Thenumber ofcopies exceeds

Check the stapler capacity. ⇒ p.51

 

 

 

 

the capacity of the stapler.

“Staple”

 

 

 

 

 

 

 

 

 

 

 

 

Copy paper is curled.

Turn the copy paper over in the

 

 

 

 

 

 

tray.

 

 

 

 

 

 

 

 

 

 

Staples are wrongly posi-

Originals are not set cor-

Check the correct position to place

 

 

tioned.

rectly.

the originals. ⇒ p.51 “Staple”

 

 

 

 

 

 

 

 

 

Misfeeds occur frequently.

Copy paper size setting is

Set the proper paper size. ⇒ p.170

 

 

 

 

not correct.

“Changing the Paper Size”

 

 

 

 

 

 

 

 

 

You cannot combine sever-

Selected functions cannot

⇒ p.152 “Combination Chart”

 

 

al functions.

be used together.

 

 

 

 

 

 

 

 

 

 

 

When sorting, the pages

The memory became full in

You can interrupt copying when the

 

 

are divided into two

the middle of sorting and

memory becomes full. ⇒ "Memory

 

 

blocks.

the pages were delivered in

Full Auto Scan Restart" on p.204

 

 

 

 

two blocks.

“Input/Output”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust Image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Cause

 

Action

 

 

 

 

 

 

 

In Double Copies mode, parts

Combination of original and

Select A3Lfor A4 Korigi-

 

 

of the original image are not

 

copy paper is not correct.

 

nals and A4 for A5 originals.

 

 

copied.

 

 

 

⇒ p.116 “Double Copies”

 

 

 

 

 

 

 

 

In Border, Center, or Cent-

 

You set a wide erased margin.

Make the margin width nar-

 

 

er/Border mode, parts of the

 

 

 

rower. You can adjust it be-

 

 

 

Originals are not scanned cor-

 

 

original image are not copied.

tween 2-99mm. ⇒ "Erase

 

 

 

 

 

rectly.

 

Border Width" and "Erase Cent-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

er Width" on p.194 “Edit 1/2

 

 

 

 

 

 

 

Set the originals correctly.

 

 

 

 

 

 

 

In Margin Adjustment mode,

You set a wide erased margin.

Set a narrower margin with

 

 

parts of the original image are

 

 

the User Tools. ⇒ "Front Mar-

 

 

There is a lack of margin space

 

 

not copied.

 

gin: Left/Right" and "Back

 

 

 

on the opposite side of the

 

 

 

 

 

Margin: Left/Right" on p.194

 

 

 

 

 

binding position.

 

 

 

 

 

 

 

“Edit 1/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

157