Size Magnification
Size Magnification
This function calculates an enlargement or reduction ratio based upon the lengths of the original and copy.
Amm | amm |
Preparation
Measure and specify the lengths of the original and copy by comparing "A" with "a."
Limitation
❒If the calculated ratio is over the maximum or under the minimum ratio, it is adjusted to within the available range of ratios automati- cally. However, with some ratios, parts of the image might not be copied or margins will appear on copies.
Note
❒A ratio is selected in the range of 25 to 400%
APress the [Reduce/Enlarge] key.
BPress the [Specifd. Ratio] key.
2
CMake sure that the [Specifd. Ratio] key is highlighted.
DEnter the length of the original with the number keys, and then press the [#] key.
Note
❒You can enter sizes within the following ranges.
Metric | 1 – 999mm (in 1mm steps) |
version |
|
|
|
Inch | 0.1" – 99.9" (in 0.1" steps) |
version |
|
|
|
❒To change the length entered, press the [Clear] or {Clear/Stop} key and enter the new length.
79