Cover/Slip Sheet

❒In "Cover" of the User Tools (Sys- tem Settings), if you selected "Mode Selected" for the "Tray Dis- play" setting, the machine refers to the settings in "Cover" about whether the front and back covers are copied single-sided ("1 Sided Only") or double-sided ("Duplex Copy"). If you selected "Display Always" for "Tray Display", the machine refers to the settings in "Special Paper Indication" about whether the front and back covers are copied single-sided ("1 Sided

Copy") or double-sided ("Duplex Copy"). ⇒ "Special Paper Indica- tion" and "Cover" in the System Settings manual

❒When you use this function with Combine mode, you can specify

whether to combine the front cover or not. ⇒ "Front Cover Copy in Combine" on p.196 “Edit 2/2”

APress the [Cover/Slip Sheet] key.

CSelect [Copy] or [Blank] for the cover sheet.

2

DSelect the paper tray containing the non-cover sheet paper, and then press the [OK] key.

EPlace your originals in the document feeder, and then press the

{Start}key.

BPress the [Front Cover] key.

143