Basic Functions
Selecting Copy PaperThere are two ways to select copy paper:
❖Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the original size and the reproduction ratio. ⇒ p.43 “Rotated copy”
❖ Manual Paper Select
2
Choose the tray containing the paper you wish to copy onto: a paper tray, bypass tray or large capacity tray (LCT).
Reference
⇒p.61 “Copying from the Bypass Tray”
Limitation
❒Only the paper trays set to "No Display" or "Recycled Paper" in "Paper Type",
and also set to "Yes" in "Apply Auto Paper Select", can be selected in Auto Pa- per Select mode. ⇒ "Paper Size Setting" in the System Settings manual
❒If you set all the paper trays other than "No Display" or "Recycled Paper", you cannot use Auto Paper Select.
Note
❒See the following table for copy paper sizes and directions that can be used with Auto Paper Select (when copying at a ratio of 100%).
❖ Metric version
Where Original Is Placed | Paper Size and Direction |
|
|
Exposure glass | A3L, B4L, A4KL, B5KL, A5L, 81/2" ⋅ |
| 14"L, 81/2" ⋅ 13"L |
Document feeder | A3L, B4L, A4KL, B5KL, A5KL, 81/2" |
| ⋅ 13"L |
|
|
❖ Inch version
Where Original Is Placed | Paper Size and Direction |
|
|
Exposure glass | 11" ⋅ 17"L, 81/2" ⋅ 14"L, 81/2" ⋅ 11"KL, |
| 10" ⋅ 14"L, 8" ⋅ 10"L |
|
|
Document feeder | 11" ⋅ 17"L, 81/2" ⋅ 14"L, 81/2" ⋅ 11"KL, |
| 10" ⋅ 14"L, 51/2" ⋅ 81/2"L |
❒For some originals, the original size might not be detected correctly. ⇒ p.20 “Sizes difficult to detect”
❒When you load special paper, such as recycled paper, in a paper tray, you can have the paper type shown on the display. ⇒ "Special Paper Indication" in the System Settings manual
41