Stamp

FChange the stamp position, size or density.

If you do not wish to make a change, go to step G.

To change the stamp position, size or density

APress the [Change] key.

BSelect the desired position, size and density.

CPress the [OK] key.

Note

❒To cancel the settings, press the [Cancel] key.

GAfter you specify all the desired settings, press the [OK] key.

HPress the [OK] key.

Note

❒To cancel the settings, press the

[Cancel] key.

IPlace your originals, and then press the {Start}key.

User Stamp

The optional HDD and 32 MB of

 

memory are required to use this func-

 

tion (if the machine is equipped with

 

the Printer unit, 32 MB of memory is

 

not required).

2

Up to four messages which you use

frequently can be stored in the ma- chine's memory and stamped on cop- ies.

Preparation

Before using this function, you have to store your messages with the User Tools. ⇒ p.131 “Pro- gram/Delete User Stamp”

Limitation

❒You cannot use the bypass tray with this function.

❒Only one message can be stamped at a time.

Note

❒You can change the print page with the User Tools.

129