Copying from the Bypass Tray
Copying from the Bypass Tray
The optional bypass tray is required to use this function.
Use the bypass tray to copy onto special paper (OHP transparencies, label paper (adhesive labels), thick paper (for example postcards and enve- lopes), thin paper) , and copy paper that cannot be loaded in the paper trays.
Preparation
When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series](for example [1 Sided]→[1 Sided] or [2 Sided]→[1 Sided]).
Note
❒ The machine can automatically detect the following sizes as standard size copy paper.
Metric | A3L, A4L, A5L, 8" ⋅ 13"L | ||||
version |
|
|
|
|
|
|
|
|
|
|
|
Inch | 11" | ⋅ | L 1 | ⋅ | L |
version |
| 17" , 8 /2" |
| 14" , | |
81/2" | ⋅ 11"L, 51/2" | ⋅ 81/2"L | |||
|
|
|
|
|
|
❒ If you do not use the standard size copy paper or if you use special pa- per, you should input vertical and horizontal dimensions. ⇒ p.22 “Copy Paper”, p.63 “When copying onto custom size paper” The sizes that you can input are as fol- lows.
Metric | • Vertical: 90 – 305mm | |
version | • Horizontal: 148 – 432mm *1 | |
|
|
|
Inch | • | Vertical: 3.6" – 12.0" |
version | • | Horizontal: 5.9" – 17.0" *1 |
*1 Paper size up to 600mm(23.6") is available when an optional HDD is installed.
❒When using paper larger than 433 mm in size, load it so that it is fed straight into the machine.
❒ When paper larger than 433 mm in | 2 |
size is used, the paper may become wrinkled, may not be fed into the machine, or may cause paper jams.
❒The maximum number of sheets you can load at the same time de- pends on the paper type. For de-
tails about the paper capacity of the bypass tray, ⇒ p.22 “Copy Pa- per”.
❒Some kinds of envelopes might cause misfeeds and wrinkles. In
this case, push down the green le- ver of the fusing unit. ⇒ p.65 “When copying onto envelopes” Also, be sure to place the front face of the envelope downwards.
AOpen the bypass tray.
61