Guide To Components
1.Exposure glass cover (option) or Document feeder (ADF) (option)
Lower the exposure glass cover over originals placed on the exposure glass for copying. If you have the document feed- er, load a stack of originals here. They will be fed automatically one by one.
(The illustration shows the document feeder.)
5.Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on.
6.Main power indicator
This indicator lights up when the main power switch is turned on and goes off when the switch is turned off.
2.Exposure glass
Place originals face down here for copy- ing. ⇒ p.18 “Originals”
3.Internal tray
Copied paper is delivered here face down.
4.Ventilation holes
Prevents overheating. Do not obstruct the ventilation holes by placing an object near it or leaning an object against it. If the machine overheats, a fault might oc- cur.
7.On indicator
This indicator lights up when the operation switch is turned on and goes off when the switch is turned off.
8.Operation switch
Press this switch to turn the power on (the On indicator lights up). To turn the power off, press this switch again (the On indicator goes off).
9.Control panel
⇒ p.8 “Control Panel”
5