Programs
Programs
You can store frequently used copy job settings in machine memory and recall them for future use.
❖Storing Your Settings
You can store the settings you fre- quently use.
❖Deleting A Program
You can delete a stored program.
❖Recalling A Program
You can recall a stored program.
Note
❒You can store up to 10 programs.
❒You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or
reset, or immediately after the op- eration switch is turned on. ⇒
“Change Initial Mode” on p.187 “General Features 2/4”
❒Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized with the User Tools (System Set- tings) will be selected first. Refer to the System Settings manual.
❒Programs are not cleared by turn-
ing the power off or by pressing the {Clear Modes} key. They are canceled only when you delete or overwrite them with another pro- gram.
AEdit the copy settings so that all functions you want to store in this 2 program are selected.
BPress the {Program}key.
CPress the [Register] key.
DPress the program number you want to store.
Note
❒Program numbers with m al- ready have settings in them.
Reference
⇒p.68 “Changing a stored pro- gram”
67