Directional Size Magnification (Inch)
Directional Size Magnification (Inch)
The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy image you require.
1 
3
2 | 4 |
CP2M01EE
1:Horizontal original size
2:Vertical original size
3:Horizontal copy size
4:Vertical copy size
Preparation
Specify the vertical and horizontal sizes of the original and those of the copy, as shown in the illustration.
Limitation
❒If the calculated ratio is over the maximum or under the minimum ratio, it is adjusted to within the available range of ratios automatical- ly. However, with some ratios, parts of the image might not be copied or margins will appear on copies.
Note
❒You can enter sizes within the fol- lowing ranges.
Metric | Vertical: 1 – 999mm (in 1mm |
version | steps) |
| Horizontal: 1 – 9999 (in 1mm |
| steps) |
|
|
Inch | 0.1" – 99.9" (in 0.1" steps) |
version |
|
|
|
❒The reproduction ratios that you can specify are
APress the [Reduce/Enlarge] key. |
| ||
2 | |||
|
|
|
|
|
|
|
|
BPress the [Specifd. Ratio] key.
CPress the [Dirc.Size Mag.In] key.
DEnter the horizontal size of the original with the number keys, and then press the [#] key.
Note
❒To change the value entered, press the [Clear] or {Clear/Stop} key and enter the new value.
83