Copying
ASelect paper type in "Special paper".
2
BPress the [OK] key.
CSet your originals and press the {Start}key.
Important
❒When you place an OHP trans- parency, make sure that its front and back faces are properly po- sitioned. Place the front face up- wards.
❒To avoid paper misfeeds, fan the paper before setting it in the tray.
❒When copying onto OHP trans- parencies, remove copied sheets one by one.
Note
❒You can also set the size of pa-
per in tray 2 in System Settings. ⇒ "Paper Size Setting" in the System Settings manual
❒The maximum limit for stacking
special paper is different from that of plain paper. ⇒ p.160 “B Loading Paper”
❒When setting OHP transparen- cies, thin paper or label paper (adhesive labels), Staple, Shift or Sort function may not be used.
60