Copying from the Paper Tray 2
BPress the [Vertical inch] key, enter the vertical size of the paper with the number keys, and then press the {#}key.
Note
❒To change the number en-
tered, press the [Clear] or {Clear/Stop} key and enter the new number.
CEnter the horizontal size of the paper with the number keys, and then press the {#}key.
Note
❒If the [Horiz inch] key is not highlighted, press the [Horiz inch] key.
❒To change the number en-
tered, press the [Clear] or {Clear/Stop} key and enter the new number.
DTo register the custom size en- tered, press the [Program] key and then press the [Exit] key.
2
Note
❒If you do not register the cus- tom size, go to step B.
❒Only one custom size can be stored.
❒To recall the custom size stored, press the [Recall] key.
❒If you do not register the cus- tom size, the size you set is dele ted wh en modes are cleared.
When copying onto special paper
To make copies onto special paper (OHP transparencies, thick paper (for example postcards and enve- lopes), thin paper, label paper (ad- hesive labels)), specify the paper type in "Special paper".
Note
❒If [2 Sided] is selected for copy-
ing in [Dup./Combine/Series] (for example [1 Sided]→[2 Sided]), se-
lect [1 Sided] for copying (for ex- ample [1 Sided]→[1 Sided]).
❒Select [Thick Paper] if the paper weight is 105g/m2 (28 lb.) or more.
59