Copying

Placing Originals in theDocument Feeder

Note

❒The last page should be on the bot- tom.

2 ❒ Do not stack originals beyond the limit mark on the side fence of the document feeder.

❒The original might become dirty if it is written with a pencil or a sim- ilar tool.

❒You cannot place a multi-page original with pages of different siz- es in the document feeder. If the originals contains pages of differ- ent width, use the SADF function and place each page one at a time. Alternatively, place pages one at a time on the exposure glass.

❒A multi-page original with the same width can be placed in the document feeder using Mixed Size mode function.

❒Do not place any foreign objects on the sensors or cover them with your hands. This could cause the size not to be detected properly.

Placing a Stack of Originals in the Document Feeder

APlace the aligned originals face up into the document feeder.

1:Limit mark

2:Document guide

Note

❒Straighten curls in the originals before placing them in the doc- ument feeder.

❒To avoid a multi-sheet feed, shuf- fle the originals before placing them in the document feeder.

1: Sensor

Reference

Regarding originals that the document feeder can handle. ⇒ p.18 “Originals”

32