The Interrupt indicator goes off.

Other Functions

Other Functions

Energy Saver Mode

If you do not operate the machine for a certain period after copying or when you press the {Energy Saver} key, the display disappears and the machine enters Energy Saver mode. When you press the {Energy Saver} key again, the machine returns to the ready condition. In Energy Saver mode, the machine uses less electrici- ty.

Note

❒If you press the {Energy Saver}key during an operation, the current settings will be cleared.

❒It takes about 3 seconds to return to the ready condition from Energy Saver mode.

Reference

⇒"Low Power Timer" in the System Settings manual

Interrupt Copy

Use this function if you wish to inter-

 

rupt a long copy job to make urgently

2

needed copies.

Limitation

❒You cannot use the Interrupt Copy function when scanning fax origi- nals.

Note

❒The procedure for making inter- rupt copies depends on which kind of operation the machine is currently carrying out.

To interrupt an original being fed by the document feeder

APress the {Interrupt}key.

The Interrupt indicator goes on and scanning stops.

BRemove the originals that were being copied and place the originals you wish to copy.

CPress the {Start}key.

The machine starts making your copies.

DWhen your copy job is finished, remove your originals and copies.

EPress the {Interrupt}key again.

FWhen the display prompts you, replace the originals that were being copied before.

71