2. Copying

Basic Procedure

AMake sure that the machine is in Copy mode.

If the machine is not in Copy mode, press the {Copy}key.

BWhen the machine is set for user codes, enter a user code (up to 8 digits) with the number keys, and then press the {#}key.

The machine is ready to copy.

Reference

p.71 “Other Functions”

CMake sure that there are no previous settings remaining.

Note

To clear settings, press the {Clear Modes}key.

DPlace your originals.

Reference

p.31 “Placing Originals”

ESet your desired settings.

FEnter the number of copies required with the number keys.

Note

The maximum copy quantity can be set between 1 and 99 (de- fault: 99).

To change the number entered, press the {Clear/Stop} key and enter the new number.

GPress the {Start}key.

The machine starts copying.

Note

When you place originals on the exposure glass, press the {#}

k e y a f t e r a l l o r i g i n a l s a r e scanned.

Copies are delivered face down.

To stop the machine during a

m u l t i - c o p y r u n , p r e s s t h e {Clear/Stop}key.

To return the machine to the in-

itial condition after copying, press the {Clear Modes}key.

29