Replacing Photo Conductor Unit (PCU)
ERaise the green handle and slide the photo conductor unit out towards you.
Important
❒Do not tilt or drop the removed photo conductor unit. Moving the unit abruptly can scatter the toner.
❒While the photo conductor unit is removed, do not change the toner.
FTake the new photo conductor unit from the box and remove the plastic | 5 |
| |
bag, holding the handle. |
|
Important
❒Do not drop or damage the removed photo conductor unit.
❒Do not touch the side of the photo conductor unit.
GPut the photo conductor unit removed in step Einto the plastic bag emptied in step F, keeping the unit at the same angle as when it was installed. Then, zip the plastic bag.
Note
❒Do not tilt the used PCU after removing it from the machine. If you do, ton- er might fall.
HRemove the two red sheets from the photo conductor unit in the order shown in the illustration.
213