Copying

Basic Functions

The following basic functions are explained in this section.

❖ Adjusting Copy Image Density

Note

❒ You can select the functions to be

activated when System Reset is

turned on, when Energy Saver is

2

Auto and Manual Image Density

turned off, or after the machine is

❖Selecting Original Type Setting

Text, Text·Photo, Photo, Pale, and Generation Copy

❖Selecting Copy Paper

Auto Paper Select and Manual Pa- per Select

❖Auto Reduce/Enlarge

The machine can choose an appro- priate reproduction ratio based on the paper and original sizes you se- lect.

❖Sort

Copies can be assembled as sets in sequential order.

turned on.

❒ You can change the default set-

tings for basic functions.

Reference

⇒"Settings You Can Change with the User Tools" in System Settings manual

Adjusting Copy Image Density

You can adjust the copy image density to match your originals.

There are three types of adjustment available:

❖Rotate Sort

Every other copy set is rotated by 90° KLand delivered to the copy tray.

❖Stack (The optional Bridge unit and an optional finisher are required for this function)

Copies can be assembled with each page placed.

❖Staple (The optional Bridge unit and an optional finisher are required for this function)

Each copy set can be stapled to- gether.

❖Auto Image Density

The machine automatically adjusts the image density.

❖Manual Image Density

If you require darker or lighter copies, adjust the image density yourself.

❖Combined Auto and Manual Image Density

Use when copying originals with a dirty background (such as news- papers). You can adjust the fore- ground density while leaving the background unchanged.

38