
16: VIP Settings
Enabling VIP
Once the bootstrap file has been imported, VIP Access can be enabled and a conduit with the DSM will be established. The VIP Statistics shows the current state of the conduit. When configured correctly, a conduit with the DSM will be maintained at all times.
Configuring Tunnels to Use VIP
Configuring Connect Mode tunnels to use VIP is a simple matter of configuring a tunnel as is normally done, but also enabling VIP in the Tunnel Host settings, and using a VIP Name for the address.
VIP Accept Mode tunnels do not require special configuration. If VIP access is enabled (in the VIP configuration page), then VIP Accept Mode requests from a ManageLinx device will be accepted.
Virtual IP (VIP) Statistics
To view the EDS VIP Statistics:
1.Select VIP from the main menu. The VIP Status page appears.
Figure 16-1 VIP Status
EDS User Guide | 148 |