
9: Line and Tunnel Settings
Figure 9-21 Tunnel 1 Modem Emulation
4. Enter or modify the following settings:
| Table |
|
|
Tunnel- Modem | Description |
Emulation Settings |
|
Echo Pluses | Select Enabled to echo +++ when entering modem Command Mode. |
|
|
Echo Commands | Select Enabled to echo the modem commands to the console. |
|
|
Verbose Response | Select Enabled to send modem response codes out on the serial line. |
|
|
Response Type | Select the type of response code: Text or Numeric. |
|
|
Error Unknown | Select whether an ERROR or OK response is sent in reply to unrecognized AT |
Commands | commands. Choices are: |
| Enabled = ERROR is returned for unrecognized AT commands. |
| Disabled = OK is returned for unrecognized AT commands. Default is Disabled. |
Incoming | Select whether Incoming Connection requests will be disabled, answered |
Connection | automatically, or answered manually. Default is Disabled. |
Connect String | Enter the connect string. This modem initialization string prepares the modem for |
| communications. It is a customized string sent with the “CONNECT” modem |
| response code. |
|
|
Display Remote IP | Selects whether the incoming RING sent on the Serial Line is followed by the IP |
| address of the caller. Default is Disabled. |
5.Click Submit.
6.Repeat above steps as desired, according to additional tunnel(s) available on your product.
EDS User Guide | 74 |