11: Service Settings
|
| Table |
|
|
|
| SNMP Settings | Description |
| State | Select Enabled to enable SNMP. |
|
|
|
| Read Community | Enter the SNMP |
|
|
|
| Write Community | Enter the SNMP read/write community string. |
|
|
|
| System Contact | Enter the name of the system contact. |
|
|
|
| System Name | Enter the system name. |
|
|
|
| System Description | Enter the system description. |
|
|
|
| System Location | Enter the system location. |
|
|
|
| Traps State | Select Enabled to enable the transmission of SNMP Traps. |
|
| The Cold Start trap is sent on device boot up, and the |
|
| Linkdown trap is sent when the device is rebooted from |
|
| software control. |
| Traps Primary Destination | Enter the primary SNMP trap host. |
|
|
|
| Traps Secondary | Enter the secondary SNMP trap host. |
| Destination |
|
3. Click Submit. |
| |
FTP Settings
The FTP web page shows the current File Transfer Protocol (FTP) configuration and various statistics about the FTP server.
To configure FTP:
1. Select FTP on the menu bar. The FTP page opens to display the current configuration.
EDS User Guide | 81 |
