11: Service Settings
HTTP Configuration
On this page you may change HTTP configuration settings.
To configure HTTP:
1.Select HTTP on the menu bar and then Configuration at the top of the page. The HTTP Configuration page opens.
Figure 11-11 HTTP Configuration
2. Enter or modify the following settings:
| Table |
|
|
HTTP Configuration | Description |
Settings |
|
State | Select Enabled to enable the HTTP server. |
|
|
Port | Enter the port for the HTTP server to use. The default is 80. |
|
|
Secure Port | Enter the port for the HTTPS server to use. The default is 443. The HTTP |
| server only listens on the HTTPS Port when an SSL certificate is |
| configured. |
|
|
EDS User Guide | 86 |
