Lantronix EDS16PR manual Network 1 eth0 Interface Configuration, Network Settings, EDS User Guide

8: Network Settings

Network 1 (eth0) Interface Configuration

This page shows the configuration settings for the Ethernet connection and lets you change these settings.

To view and configure network interface settings:

1.Select Network on the menu bar, if you are not already in the Network web page.

2.Select Interface > Configuration submenus at the top of the page. The Network 1 (eth0) Interface Configuration page appears.

Figure 8-2 Network 1 (eth0) Interface Configuration

3. Enter or modify the following settings:

	Table 8-3Network Interface Configuration
Network 1 Interface	Description
Configuration
Settings
BOOTP Client	Select On or Off. At boot up, the device will attempt to obtain an IP address from a
	BOOTP server.
	Notes:
	 Overrides the configured IP address, network mask, gateway, hostname, and
	domain.
	 When DHCP is On, the system automatically uses DHCP, regardless of whether
	BOOTP Client is On.

EDS User Guide 49