11: Service Settings
HTTP Configuration | Description | |
Settings (continued) |
|
|
Secure Protocols | Select | to enable or disable the following protocols: |
| SSL3 = Secure Sockets Layer version 3 | |
| TLS1.0 = Transport Layer Security version 1.0. TLS 1.0 is the successor | |
| of SSL3 as defined by the IETF. | |
| TLS1.1 = Transport Layer Security version 1.1 | |
| The protocols are enabled by default. | |
| Note: A server certificate and associated private key need to be installed in | |
| the SSL configuration section to use HTTPS. | |
Max Timeout | Enter the maximum time for the HTTP server to wait when receiving a | |
| request. This prevents | |
| seconds. | |
|
| |
Max Bytes | Enter the maximum number of bytes the HTTP server accepts when | |
| receiving a request. The default is 40 kB (this prevents DoS attacks). | |
Logging State | Select Enabled to enable HTTP server logging. | |
|
| |
Max Log Entries | Sets the maximum number of HTTP server log entries. Only the last Max | |
| Log Entries are cached and viewable. | |
Log Format | Set the log format string for the HTTP server. Follow these Log Format | |
| rules: |
|
| %a - | remote IP address (could be a proxy) |
| %b - | bytes sent excluding headers |
| %B - bytes sent excluding headers (0 = | |
| %h - remote host (same as '%a') | |
| %{h}i - header contents from request (h = header string) | |
| %m - request method | |
| %p - ephemeral local port value used for request | |
| %q - query string (prepend with '?' or empty | |
| %t - timestamp HH:MM:SS (same as Apache '%(%H:%M:%S)t' or | |
| '%(%T)t') | |
| %u - remote user (could be bogus for 401 status) | |
| %U - URL path info | |
| %r - first line of request (same as '%m %U%q <version>') | |
| %s - return status | |
Authentication | The timeout period applies if the selected authentication type is either | |
Timeout | Digest or SSL/Digest. After this period of inactivity, the client must | |
| authenticate again. | |
3.Click Submit.
EDS User Guide | 87 |
