Lantronix EDS16PR, EDS32PR, EDS4100, EDS8PR, EDS16PS Configuration Using Web Manager, EDS User Guide

7:Configuration Using Web Manager

This chapter describes how to configure the EDS using Web Manager, the Lantronix browser- based configuration tool. The unit’s configuration is stored in nonvolatile memory and is retained without power. All changes take effect immediately, unless otherwise noted. It contains the following sections:

Accessing Web Manager

Web Manager Page Components

Navigating the Web Manager

Table 7-3 Summary of Web Manager Pages

Accessing Web Manager

Note: You can also access the Web Manager by selecting the Web Configuration tab on the DeviceInstaller window.

To access Web Manager, perform the following steps:

1.Open a standard web browser. Lantronix supports the latest version of Internet Explorer, Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.

2.Enter the IP address of the EDS in the address bar. The IP address may have been assigned manually using DeviceInstaller (see the EDS Quick Start Guide) or automatically by DHCP.

3.Enter your username and password.The factory-default username is “admin” and the factory- default password is “PASS.” The Device Status web page shown in Figure 7-1displays configuration, network settings, line settings, tunneling settings, and product information.

Note: The Logout button is available on any web page. Logging out of the web page would force re-authentication to take place the next time the web page is accessed.

EDS User Guide 43