Test page does not print
These are possible solutions. Try one or more of the following:
MAKE SURE THE PRINTER IS RECEIVING POWER
If is not on, the printer may not be receiving power.
Press .
Plug the printer into a different electrical outlet.
If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.
MAKE SURE THE STICKER AND TAPE ARE REMOVED FROM THE PRINT CARTRIDGES
1Lift the scanner unit.
2Remove the print cartridges from the print cartridge carrier.
3Make sure the sticker and tape are removed from the bottom and back of the print cartridges.
MAKE SURE THE CARTRIDGES ARE PROPERLY INSTALLED
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black cartridge or photo cartridge, make sure
it is properly installed in the left carrier.
For more information, see “Installing print cartridges”.
MAKE SURE THE LEXMARK PRINTER DRIVER IS SET AS THE DEFAULT PRINTER
For more information on checking the printer default setting, see ”Checking the printer status.”
To test the solution, print a test page.
1Click Programs or All Programs Lexmark 5300 Series.
2Click Lexmark Solution Center.
3Click the Maintenance tab.
4Click Print a test page.
The problem may be with the cable connections. For more information, see “Cable is not connected, is loose, or is
damaged.”
Troubleshooting
140