The message PictBridge camera detected. Press to change settings. appears on the
display.
2Press or repeatedly until the menu item you want appears.
3Press .
4Press or repeatedly until the submenu item you want or the setting you want appears.
5Press .
Note: Pressing selects a setting. An * appears next to the selected setting.
6To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7If necessary, press repeatedly to return to the previous menus and make other setting selections.
Menu Item Action
Paper Size1, 2 Specify the size of paper loaded.
Photo Size1, 2 Specify the size of printed photos.
Layout1Center one photo on a page, or specify the number of photos to print on a
page.
Quality1Adjust the quality of printed photos.
Paper Type1, 2 Specify the type of paper loaded.
Note: The printer is equipped with an automatic paper type sensing device.
The Paper Type Sensor automatically detects the type of paper that has been
loaded into the printer and adjusts the settings for you.
1 Setting will return to factory default setting when the PictBridge-enabled digital camera is removed.
2 Setting must be saved individually. For more information, see “Saving settings” on page 39.
Working with photos
67