Lexmark 5300 Series manual Loading envelopes, Loading labels

Loading envelopes

You can load up to 10 envelopes at a time.

Warning—Potential Damage: Do not use envelopes that have metal clasps, string ties, or metal folding bars.

1Load envelopes in the center of the paper support with the stamp location in the upper left corner.

2Make sure:

•The print side of the envelopes faces you.

•The envelopes are designed for use with inkjet printers.

•The paper guides rest against the edges of the envelopes.

1

2

Notes:

•Do not load envelopes with holes, perforations, cutouts, or deep embossing.

•Do not use envelopes that have exposed flap adhesive.

•Envelopes require more drying time. Remove each envelope as it exits, and allow it to dry to avoid ink smudging.

Loading labels

You can load up to 25 sheets of labels at a time.

1Load labels with the print side facing you and the top of the sheet fed into the printer first.

2Make sure:

•The print side of the labels faces you.

•The top of the labels feeds into the printer first.

•The adhesive on the labels does not extend to within 1 mm of the edge of the labels.

•You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.

•The labels are loaded in the center of the paper support.

•The paper guides rest against the edges of the labels.

Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink smudging.

Loading paper and original documents

49