Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1Press or repeatedly until the setting you want appears.
2Press :
To save most settings. An * appears next to the saved setting.
To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting of a temporary setting after two minutes of inactivity or if
the printer is turned off.
Temporary settings
Copy Mode Copies
Resize
Lighter/Darker
Quality
Repeat Image
N-Up
Original Size
Original Type
Scan Mode Quality
Original Size
Resize
Fax Mode Lighter/Darker
Quality
Photo Card The following Photo Card settings will not time-out after two minutes of
inactivity or turning off the power but will return to the factory default settings
when a memory card or flash drive is removed.
Photo Effects
Paper Size
Photo Size
Layout
Quality
Paper Type
To change the time-out feature:
aPress .
bPress or repeatedly until Tools appears.
cPress .
dPress or repeatedly until Device Setup appears.
ePress .
fPress or repeatedly until Clear Settings Timeout appears.
Setting up the printer
39