Removing a memory card

Complete the following steps if you need to remove a memory card. Otherwise, go to Installing the system board access cover.

1Make sure the printer is turned off and the power cord is unplugged.

2Follow the steps for Removing the system board access cover if it is still installed.

WARNING: Memory cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card.

3Push the latches at each end of the connector away from the card. The memory card moves out of the connector as the latches open.

4Gently pull the card out.

5Place the card into the original packaging.

If you do not have the original packaging, wrap the card in paper and store it in a box.

6Close both latches.

7Repeat steps 3 through 6 to remove additional memory cards.

117

Page 119
Image 119
Lexmark 910 manual Removing a memory card, 117