Lexmark 910 manual Closing the multipurpose feeder

9Select the paper source, size, and type from your software application and select paper size and type from the operator panel.

a Make sure the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) are set to the correct value for the print media you are loading. (See Paper Size and Paper Type for detailed information about these settings.)

b Press Go to return to Ready.

Note: Software settings may override operator panel settings.

Closing the multipurpose feeder

1Remove print media from the multipurpose feeder.

2If necessary, push the extended tray in to collapse the multipurpose feeder to its short-length position.

3Push down the bottom plate until it locks into place.

50