Lexmark 910 manual Too Many Bins Attached, Too Many Disks Installed, 223

58 Too Many

Bins Attached

What this message means:

•Too many output bins are installed.

•An unsupported configuration of output bins is installed.

What you can do:

Turn off and unplug the printer. Remove or reconfigure the output bins. Plug in the printer and turn it on.

Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a non-ground fault interrupter (GFI) circuit.

58 Too Many

Disks Installed

What this message means:

Too many hard disks are installed. The printer only supports one hard disk at a time.

What you can do:

Turn off and unplug the printer. Remove the excess hard disks. Plug in the printer and turn it on.

Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a non-ground fault interrupter (GFI) circuit.

See also:

Removing memory and network options

223