Your printer monitors the life of your transfer belt. When the transfer belt reaches the end of its life, the printer displays 80 Belt Exhausted. This message indicates it is time for you to replace the transfer belt. For best print quality, make sure you replace the transfer belt when the printer displays 80 Belt Life Warning.
Press Go to clear the message. The Supplies message appears on the second line of the display to remind you that supplies need attention. You can open the Supplies Menu to see 80 Belt Exhausted or 80 Belt Life Warning messages.
The printer continues to display the Supplies message until you replace the transfer belt. To replace the transfer belt, use the following steps or the instruction sheet supplied with the transfer belt.
Preparing for maintenance
1Turn the printer on.
2Follow the instructions in the table for the message your printer is displaying.
Primary message | Secondary message | What you should do | |
80 | Belt Life Warning | Select = Replace | Press Select if you want to |
|
| Go = Continue | replace the transfer belt now. |
|
| Press Go if you want to wait to | |
|
|
| |
|
|
| replace the transfer belt. |
|
|
|
|
80 | Belt Exhausted | Select = Replace | Press Select to replace the |
|
|
| transfer belt. |
|
|
|
|
80 | Belt/Fuser Life Warning | Select = Replace | Press Select if you want to |
|
| Go = Continue | replace the transfer belt now. |
|
| Press Go if you want to wait to | |
|
|
| |
|
|
| replace the transfer belt. |
|
|
|
|
80 | Belt/Fuser Exhausted | Select = Replace | Press Select to replace the |
|
|
| transfer belt. |
|
|
|
|
The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items.
3Turn the printer off.
95
