54 Network <x> | 54 Std Network |
Software Error | Software Error |
What these messages mean:
The printer cannot establish communications with an installed network port.
What you can do:
•Press Go to clear the message and continue printing. The job may not print correctly.
•Program new firmware for the network interface by way of the parallel port.
•Press Menu to open the Job Menu and reset the printer.
54 Std Par | ENA | 54 Par <x> | ENA |
Connection | Lost | Connection | Lost |
What this message means:
The printer has lost the connection to an external print server (also called an external network adapter or ENA).
What you can do:
•Make sure the cable connecting the ENA and the printer is securely attached. Turn the printer off and then on to reset the printer.
•Press Go to clear the message. The printer erases any reference to the ENA and then resets.
56 Serial
Port <x> Disabled
What this message means:
Data has been sent to the printer through a serial port, but the serial port is disabled.
What you can do:
•Press Go to clear the message. The printer discards any data received through the serial port.
•Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled.
See also:
Serial Buffer
221
