LOREX Technology QLR1660 Appendix, Pan/Tilt/Zoom Camera Installation, Camera Model, Camera pin

QLR1660 User Manual

APPENDIX

1. Pan/Tilt/Zoom Camera Installation

If you want to use P/T/Z camera with QLR1660, you need to connect with ‘RS-232C to RS-485 Converter’. You need to pay for ‘RS-232C to RS-485 Converter’ extra.

1-1. Concept of system configuration

Camera Model	QLR1660Channel		Connecting pin of Camera with converter					Camera Channel
			Camera pin			Converter (pin of RS 485)		(Dome ID Switch)
DYNACOLOR	all available		D+, D-			Tx+, Tx-		all available
ACED-1000
SMART PTZ
GC-655N	all available		Rx+, Rx-			Tx+, Tx-		all available
SD-290
DRX-502A&CNB
CA 1170
…..
Speed Dome Camera				RS-232C to RS-485				QLR1660
(P/T/Z camera) (Pin)					Converter (pin)			Computer
all available	(D +) Rx+				Tx+	TD		all available
		RS-485					RS-232C
	(D -) Rx-				Tx-	RD

Attention

The number of Camera Channel Dome ID Switch(s/w) needs to correspond to the number of a channel of

QLR1660 when installed. (ex. In case of 8 channels)

QLR1660 Channel	Dome ID Switch	QLR1660 Channel	Dome ID Switch
	(Camera Channel)		(Camera Channel)
1	1	5	5
2	2	6	6
3	3	7	7
4	4	8	8

1-2. Example of Matching QLR1660 with Camera channels

User needs to connect directly
RS-232 To RS-485 Converter with		DYNACOLOR
Com Port. (9Pin: 9pin or 9pin: 25pic)		P/T/Z Camera
COM port	Tx+	D+
	Tx -	D-
RS-232 → RS-485 Converter

One of com1, com2, com3, and com4 must be set up under O/S.

Camera type and Comport set up in QLR1660 Server S/W.

User needs to connect RS-232 To RS-485 Converter with P/T/Z camera one-to-one. (Converter: Tx+ ←→ Rx+ Camera)

(Converter: Tx- ←→ Rx- Camera)

72