LOREX Technology QLR1660 instruction manual Setup button, Connect button

QLR1660 User Manual

■ Setup button	Click here to enter the Setup Mode.
	[NOTE] The default password for user of Client is ‘1111’.
■ Search button	Click here to enter the Search mode.
	You can search recordings by camera number, date, time and event.
	[NOTE] The default password for user of Client is ‘1111’.
■ Shutdown button	Click this button to shutdown the main server application.
	[NOTE] The default password for user of Client is ‘1111’.
■ Pan/Tilt/Zoom	It enables you to control remotely the P/T/Z camera that you select to
Control buttons	move and get the scene according to your direction dynamically.

-The following controls are available:

▪Camera Selection to control Pan/Tilt/Zoom/Focus

▪Tilt up/down (▲/▼)

▪Pan left/right (◄/►)

▪Zoom in/out (+/-)

▪Focus in/out (+/-)

▪Auxiliary (1,2,3)

	(Refer to ‘Appendix -1.Pan/Tilt/Zoom Camera Installation’.)
■ Audio Speaker(On/Off)	Use for full-duplex audio communication with the QLR1660
/ Volume Control	Server system.
buttons	- Clicking the speaker button enables you to listen to the
	sound transmitted from the connected QLR1660 Server.

-Control the volume by moving the volume control button.

[NOTE] For full-duplex audio communication with the QLR1660 Server system, ‘Audio recording and transferring' in System setup panel have to be enabled. And, the Microphone have to be connected to sound card of computer and the ‘Microphone In’ at the Volume Control setup of windows have to be muted.

■Connect button

Click to connect/disconnect with the Remote Server.

■Recording On/Off buttons

▶Schedule Recording button ()

:You can enable Schedule Recording according to Setup by clicking the ‘Schedule Rec.’ button.

[NOTE] If ‘Schedule Rec.’ button is off, all kind of recording (video and audio) components configured in the Setup mode are disabled

▶Group buttons (A,B)

:By clicking each group button (A,B), displays 8 channel recording buttons belongs to each group

▶Channel Recording buttons (1~16)

:Using these buttons, you are able to record each channel by clicking the desired channel. The Continuous record icon () will be displayed on the camera screen.

58