QLR1660 User Manual
(3) Schedule Record Setup
▶Camera select: Select a camera to setup Recording Schedule. If you click ‘All Camera’, the Recording Schedule is applied to all cameras.
▶Record mode: Appoint the time by dragging on the timetable and click a record mode. Then, the selected record mode is assigned at the appointed time.
▪Continuous: Record continuously the monitoring video. (
)
▪Event (M or S): Record when event (motion detection or sensor input) occurs. (
)
▪Erase: Not record but only monitoring.
Recording mark (R) is displayed on screen of each camera when it is recording.
[NOTE] Event (motion, sensor input) at the QLR1660 Client system occurs on the signal when event (motion, sensor input) occur according Motion/Sensor Setup at QLR1660 Server system connected.
66
